HCS2036-09 – UAV Composite Repair Tool Kit
The HCS2036-09 “UAV” Composite Repair Tool Kit is designed to provide you with all the necessary tools you need to efficiently perform a composite repair.
A wide array of tools and accessories are included to provide you with everything you need to effectively complete the job.
These pre-assembled cases have a convenient place for each tool so you always know where to find them. Best of all, each kit is rugged, lightweight, and portable for those on-location field repairs.
| FITTING,AIR INPUT, MALE, 1/4” NPT MALE,TYPE-M | HCS1014-005 | 4 | ||
| HAMMER,TAPINSPECTION, COMPOSITE STRUCTURES, ALUMINUM CONSTRUCTION WITH LOGO | HCS1104-01 | 1 | ||
| VACUUM PUMP AND SNIFFER ASSEMBLY | HCS2026-01 | 1 | ||
| DRILLGUIDE/HOUSING, FOR BUSHING PART# HCS2036-01-001B TO 001J | HCS2036-01-001 | 1 | ||
| DRILLGUIDE/BUSHING 3/32” | HCS2036-01-001B | 1 | ||
| DRILLGUIDE/BUSHING 1/8” | HCS2036-01-001D | 1 | ||
| DRILLGUIDE/BUSHING 5/32” | HCS2036-01-001F | 1 | ||
| DRILLGUIDE/BUSHING 3/16” | HCS2036-01-001H | 1 | ||
| DRILLGUIDE/BUSHING 1/4” | HCS2036-01-001J | 1 | ||
| DRILLMOTOR,AIR, 5200 RPM, 0-3/8” ID CHUCK | HCS2036-01-002 | 1 | ||
| ROUTER MOTOR, 208 (1/4”) COLLET STD, 0.9HPMOTOR,AIR DRIVEN, 25,000 RPM, STRAIGHTHANDLE, ORANGE HOUSING | HCS2036-01-012 | 1 | ||
| ROUTER BASE,TWO-HANDED, FOR SERIES, 10-20 GRINDERS | HCS2036-01-013 | 1 | ||
| ROUTER BIT, 1/4”X 3” OAL, 40 MESH, DIAMOND CUT, 1” CUTTING SURFACE | HCS2036-01-014 | 1 | ||
| ROUTER BIT, 1/4”X 2” OAL, END MILL STYLE, DIAMOND CUT, 1/4” SHANK DIA., 2” O.A.L., 3/4” FLUTE LENGTH | HCS2036-01-015 | 1 | ||
| ROUTER BIT, 1/4”X 2” OAL, DRILLPT, DIAMOND CUT, 3/4” FLUTE LENGTH, 1/4” SHANK DIA., 2” O.A.L. | HCS2036-01-015A | 1 |
| ROUTER BIT, 3/16”X 2” OAL, BURR STYLE, DIAMOND CUT, 3/16” SHANK DIA., 2” O.A.L., 3/4” FLUTE LENGTH | HCS2036-01-015C | 1 | ||
| GRINDER, AIR DRIVEN 90 DEG., REAR EXHAUST, 20,000 RPM | HCS2036-01-022 | 1 | ||
| DRUMS, RUBBER SANDING W/ SLEEVE ASSORTMENT, 1/4” DIA SHANK WITH THE FOLLOWING SIZED BARRELS: 1/2” X 1/2”, (1/8” DIA SHANK), 3/4” X 1”, 1” X 1”, 1-1/2” X 1-1/2”, 2” X 1-1/2”, INCLUDES: 1SET, 50 GRIT AND 1 SET120 GRIT | HCS2036-01-025 | 1 | ||
| SANDING BARREL, 1” X 1” X 80 GRIT | HCS2036-01-026 | 1 | ||
| SANDING PAD, 2”, SPEED LOCTS MOUNT WITH THREADED MANDREL (STD ABRASIVES SOCATT MOUNT) | HCS2036-01-028 | 1 | ||
| SANDING PAD, 1”, SPEED LOCTS MOUNT WITH THREADED MANDREL (STD ABRASIVES SOCATT MOUNT) | HCS2036-01-029 | 1 | ||
| SANDING DISK, 2” DIA, 80 GRIT, SPD LOCTS, STD.ABR. SOCATT MOUNT, ALUM OXIDE | HCS2036-01-030 | 10 | ||
| SANDING DISK, 1” DIA, 80 GRIT SPD LOCTS, STD.ABR. SOCATT MOUNT, ALUM OXIDE | HCS2036-01-031 | 10 | ||
| SANDING DISK, 2” DIA, 180 GRIT, SPD LOCTS, STD.ABR. SOCATT MOUNT,ALUM OXIDE | HCS2036-01-032 | 10 | ||
| SANDING DISK, 1” DIA, 180 GRIT, SPD LOCTS, STD.ABR. SOCATT MOUNT,ALUM OXIDE | HCS2036-01-033 | 10 | ||
| COUNTERSINK FEED (CAGE ASSEMBLY) | HCS2036-01-034 | 1 | ||
| COUNTERSINK, 1/2” X 100 DEGREE, 1/8” PILOT, CARBIDETIPPED | HCS2036-01-035 | 1 | ||
| COUNTERSINK, 1/2” X 100 DEGREE, 5/32” PILOT, CARBIDETIPPED | HCS2036-01-036 | 1 |
| COUNTERSINK, 1/2” X 100 DEGREE,3/16” PILOT, CARBIDETIPPED | HCS2036-01-037 | 1 | ||
| COUNTERSINK, 1/2” X 100 DEGREE,1/4” PILOT, CARBIDETIPPED | HCS2036-01-038 | 1 | ||
| CUTTER, HONEYCOMB CORE, FLAT KNIFE | HCS2036-01-039 | 1 | ||
| SANDING DISK, 1” DIA, 120GRITSPD LOCTS, STD ABR. SOCATTMOUNT, ALUM OXIDE | HCS2036-01-040 | 10 | ||
| SANDING DISK, 2” DIA, 120 GRITSPD LOCTS, STD ABR. SOCATTMOUNT, ALUM OXIDE | HCS2036-01-041 | 10 | ||
| ROUTER BIT, 1/4” SPLITHELIX, FOR CUTTING KEVLAR LAMINATES, CARBIDE 1/4” DIA2.5” LONG, SPEED 1600-1900 SFM, **MUST SUPPLY WITH WARNING NOTICES | HCS2036-01-043 | 1 | ||
| ROUTER BIT, 1/4” X 3” OAL, BURR | HCS2036-01-043A | 1 | ||
| ROUTER BIT, 1/4”X 3” OAL, DRILL PT, CARBIDE, 3” LONG X 1” FLUTE LENGTH FOR KEVLAR, DIAMOND CUT | HCS2036-01-043B | 1 | ||
| ROUTER BIT, 1/4”X 3” OAL, END MILLCARBIDE, 3” LONG X 1” FLUTE LENGTH, FOR KEVLAR, DIAMOND CUT | HCS2036-01-043C | 1 | ||
| ROUTER BIT, 1/4”X 3” OAL, BI SHEAR, COMPRESSION, FOR KEVLAR 1” FLUTE LENGTH | HCS2036-01-044A | 1 | ||
| KNIFE, RETRACTABLE UTILITY | HCS2036-01-051 | 1 | ||
| SHEARS, FISKAR SOFTTOUCH NOT FOR USE ON KEVLAR MATERIAL, 10-1/2” OA LX 3-5/8” CUTTING LENGTH | HCS2036-01-053 | 1 | ||
| SHEARS, FOR KEVLAR, RH, 12” OAL, CARBIDE COATED | HCS2036-01-186 | 1 | ||
| SWEEPKIT, 7PC, 1/4”, POLYETHYLENE | HCS2036-01-055 | 1 | ||
| DRILLBIT, 3/32” SOLID CARBIDE, 118DEG POINT, JOBBER LENGTH **NOT RECOMMENDED FOR KEVLAR** | HCS2036-01-056A | 10 | ||
| DRILLBIT, 1/8”, CARBIDETIPPED, 135 DEGREE POINT, JOBBER LENGTH **NOT RECOMMENDED FOR KEVLAR** | HCS2036-01-057A | 10 | ||
| DRILLBIT, 5/32”, CARBIDETIPPED, 135 DEGREE POINT, JOBBER LENGTH **NOT RECOMMENDED FOR KEVLAR** | HCS2036-01-058A | 10 |
| DRILLBIT, 3/32”, KEV POINT, FOR KEVLAR | HCS2036-01-059B | 5 |
| DRILLBIT, 1/8”, KEV POINT, FOR KEVLAR | HCS2036-01-059C | 5 |
| DRILLBIT, 5/32”, KEV POINT, FOR KEVLAR | HCS2036-01-059D | 5 |
| DRILLBIT, 3/16”, KEV POINT, FOR KEVLAR | HCS2036-01-059E | 5 |
| DRILLBIT, 1/4”, KEV POINT, FOR KEVLAR, OALUNDER 3” | HCS2036-01-059F | 5 |
| DRILLBIT, 3/16”, CARBIDETIPPED,135 DEGREE SPLITPOINT, 2.25”, NOT RECOMMENDED FOR KEVLAR | HCS2036-01-059J | 10 |
| DRILLBIT, 1/4”, CARBIDETIPPED,135 DEGREE SPLITPOINT, 2.5”, NOT RECOMMENDED FOR KEVLAR | HCS2036-01-059K | 10 |
| MICROSCOPE, MAGNIFER, 30X | HCS2036-01-067 | 1 |
| SANDER, RANDOM/ORBITAL, 5” PAD,12,000 RPM 1/2HP | HCS2036-01-100 | 1 |
| SANDING BARREL, 1/2”X1/2”, 120GRIT | HCS2036-01-075 | 1 |
| SANDING BARREL, 3/4”X1”, 120 GRIT | HCS2036-01-076 | 1 |
| SANDING BARREL, 1” X 1”, 120 GRIT | HCS2036-01-077 | 1 |
| SANDING BARREL, 1-1/2”X1-1/2”,120 GRIT | HCS2036-01-078 | 1 |
| SANDING BARREL, 2”X 1-1/2”,120GRIT | HCS2036-01-079 | 1 |
| SANDING BARREL, 1/2” X 1/2”, 80GRIT | HCS2036-01-080 | 1 |
| SANDING BARREL, 3/4” X 1”, 80 GRIT | HCS2036-01-081 | 1 |
| SANDING BARREL, 1-1/2” X 1-1/2”X80 GRIT | HCS2036-01-082 | 1 |
| SANDING BARREL, 2”X 1-1/2”, 80GRIT | HCS2036-01-083 | 1 |
| SANDING DISK, 5” DIA, 80 GRIT ALUMINUM OXIDE, PSASTICK-IT | HCS2036-01-084 | 10 |
| SANDING DISK, 5” DIA, 120 GRIT ALUMINUM OXIDE, PSA STICK-IT | HCS2036-01-085 | 10 |
| CUT-OFF WHEEL, 3”, FIBERGLASS REINFORCED 3” X 1/16” X 1/4” ARBOR, MAX SPEED 25,465 RPM | HCS2036-01-087 | 10 |
| ARBOR, DIAMOND WHEEL1/4” SHANK | HCS2036-01-092 | 1 |
| COLLET, 5/32”, FOR .110 SMALLEND,.128 SHANK, #2 ROUTER BIT, (USE WITH HCS2036-01-012 ROUTER MOTOR) | HCS2036-01-101 | 1 |
| BLADE, CUTTING KNIFE, CHISEL,#18, FITS KNIFE HCS2036-01-120, 5BLADES PER PACKAGE | HCS2036-01-120-18 | 5 |
| BLADE, CUTTING KNIFE, CARVING,#19, FITS KNIFE HCS2036-01-120 5BLADES PER PACKAGE | HCS2036-01-120-19 | 5 |
| BLADE, CUTTING KNIFE,ANGLED,#24 FITS KNIFE HCS2036-01-120A5BLADES PER PACKAGE | HCS2036-01-120-24 | 5 |
| KNIFE, CUTTING, #2, REPLACABLE BLADE | HCS2036-01-120A | 1 |
| KNIFE, CUTTING, HEX METAL HANDLE, REPLACEABLE BLADE | HCS2036-01-120B | 1 |
| ROLLER, FIBERGLASS, 1/2” X 3”, ALUM | HCS2036-01-121 | 1 |
| SANDING DISK, 5” DIA, 150 GRIT, PSA,ALUMINUM OXIDE ON ‘C’ WEIGHTPAPER | HCS2036-01-161 | 10 |
| SANDING DISK, 5” DIA, 180 GRIT, PSA,ALUMINUM OXIDE ON ‘C’ WEIGHTPAPER | HCS2036-01-162 | 10 |
| SANDING DISK, 5” DIA, 220 GRIT, PSA,ALUMINUM OXIDE ON ‘C’ WEIGHTPAPER | HCS2036-01-163 | 10 |
| SANDING DISK, 5” DIA, 320 GRIT, PSA,ALUMINUM OXIDE ON ‘C’ WEIGHTPAPER | HCS2036-01-164 | 10 |
| SANDING DISK, 5” DIA, 500 GRIT, PSA,ALUMINUM OXIDE ON ‘C’ WEIGHTPAPER | HCS2036-01-165 | 10 |
| SANDING DISK, 5” DIA, 800 GRIT, PSA,ALUMINUM OXIDE ON FILM BACK | HCS2036-01-166 | 10 |
| SANDING DISK, 5” DIA, 1200 GRIT, PSA,ALUMINUM OXIDE ON FILM BACK | HCS2036-01-168 | 10 |
| SANDING DISK, 2” DIA, 150 GRIT, SPEED LOKTS,ALUMINUM OXIDE | HCS2036-01-172 | 10 |
| SANDING DISK, 2” DIA, 240 GRIT, SPEED LOKTS,ALUMINUM OXIDE | HCS2036-01-174 | 10 |
| SANDING DISK, 2” DIA, 320 GRIT, SPEED LOKTS,ALUMINUM OXIDE | HCS2036-01-175 | 10 |
| SANDING DISK, 1” DIA, 150 GRIT, SPEED LOKTS,ALUMINUM OXIDE | HCS2036-01-178 | 10 |
| SANDING DISK, 1” DIA, 240 GRIT, SPEED LOKTS,ALUMINUM OXIDE | HCS2036-01-180 | 10 |
| SANDING DISK, 1” DIA, 320 GRIT, SPEED LOKTS,ALUMINUM OXIDE | HCS2036-01-181 | 10 |
| BOX, PLASTIC FLEX-A-TOPHINGED LID, ID 2.64” X 3.60” X 1.5” | HCS2036-125 | 22 |
| BOX, PLASTIC FLEX-A-TOPHINGED LID, ID 4.41” X 7.89” X 1.16” | HCS2036-126 | 4 |
| PETRI DISH, 150mm X 25mm, STYRENE PLASTIC W/ LID | HCS2036-127 | 4 |
| PLACARD, HCS2036-09TOOLKIT (1 OF 2), 2 X 6”, BLACK W/WHITE LETTERS, PLASTIC | HCS1010-182 | 1 |
| PLACARD, HCS2036-09CONSUMABLES KIT(2 OF 2), 2 X 6”, BLACK W/WHITE LETTERS, PLASTIC | HCS1010-183 | 1 |
| CASE, HCS2036-09TOOLKIT, TOOLS, REMOVABLE LID, DIVIDER FLAP, CUSTOM FOAM | HCS1011-033 | 1 |
| CASE,TOOLKITHCS2036-09, COMSUMABLES, 3.0”TOP, 3.0” BOTTOM, DIVIDER FLAPINTOP PORTION,TAKE-APARTHINGES, CUSTOM FOAM FILLER | HCS1011-034 | 1 |